My Cart:

0 item(s) - $0.00
You have no items in your shopping cart.


Compatible Fit For LG LT-500P 5231JA2002A Water Filter


Mfg Price: $39.99

Your Price: $24.50

  • Buy 3 for $23.00 each - Free S&H


Compatible Fit Refrigerator Water Filters


Quick Overview

2pk $49 Free S&H
Designed for a variety of LG & Kenmore Sears Refrigerators.


Compatible Fit For LG LT-500P 5231JA2002A Water Filter


Economical alternative to expensive substitutes.
Delivers clean, clear water that looks and tastes great.
Will remove or reduce chlorine taste and odor that may be present in your drinking water.
Designed to provide up to six months of life or 300 gallons.
Does not remove minerals which may be beneficial to health.

Flow Rate: .5 gpm/1.89 lpm
Operating Temperature: 33 - 100°F
Min Operating Pressure: 30 psi
Max Operating Pressure: 120 psi
Measurements Approx. 5 1/2 Inches Tall and 3 1/2 Inches Wide.
This filter should not be used with water that is microbiologically unsafe or of unknown quality, without adequate disinfection before and/or after the filter.
This filter has been tested by the manufacturer against ANSI/NSF Standard 42 for the reduction of chlorine taste and odor.

The LT-500P is comparable with the following part numbers

Aqua Fresh WF290 EcoAqua EFF-6003A LG 5231JA2002A-S
Swift Green SGF-LA22 Tier1 5231JA2002B GEN11042FR-08
GEN11042F-08 RWF1050 LG LT500P
Kenmore 46-9890 Kenmore 469890 Kenmore 9890
Kenmore 9890P WSL-1 LG LT500PC
ADQ72910906 ADQ72910907 1266858
AH3527580 AP4444454 EAP3527580

Replacement for the Following UPC


Installation Instructions

1. Locate the existing filter. It will be located behind the light cover above the top shelf on the right hand side.
2. Remove the top shelf. This will give you more room to remove and install the new filter.
3. Remove the light cover by pressing the release clip on the bottom of the cover and pulling the cover out and up to remove the light cover.
4. Locate existing filter and remove it by turning it counter clockwise.
5. Holding new filter in your hands, carefully remove the packaging and sanitary end-cap from the new filter. Check the black o-rings making sure they are both on and not damaged (torn or cracked).
6. Locate the Start arrow found at the top of the instruction label on the back side of the filter and Align the Start arrow with the arrow on the refrigerator filter head.
7. Apply slight upward pressure and rotate the filter clockwise until the Stop arrow on the front of the filter label is aligned with the arrow on the refrigerator filter head.
8. Ensure filter is fully installed in the refrigerator filter head a full 1/4 turn. This is required to activate the internal valve inside the refrigerator. If the filter is not turned 1/4 turn the valve will not fully open and may cause the water flow to be slow, or even cause the valve to make a chattering noise during use.
9. Dispense water for approx. 2 gallons making sure that air and water is completely flushed from the system.
10. Replace the light cover and top shelf.
11. Locate and follow instructions on use of date label for your filter.

Resetting Your Filter Change Indicator

  1. .

Fits the Following Model Numbers

Kenmore 795.5131 Kenmore 795.51033.011 Kenmore 795.51312 Kenmore 795.51029.010 Kenmore 795.58826900
Kenmore 795.72093310 Kenmore 7955131 Kenmore 79551033.011 Kenmore 79551312 Kenmore 79551029.010
Kenmore 79558826900 Kenmore 79572093310 lSC27925ST LMX25964ST LRSC21935
LRSC26905 LRSPC2031 LRSPC2041 LRSPC2051 LRSPC2331
LRSPC2341 LRSPC2661 LSC23924

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.